Filter
Top Products
9
English
INSTALLING THE DISCSINSTALLING THE DISCS
Disc
adapter
Finger grip
Installing the adjustable slicing disc
Finger grip
Drive pin
NOTE: If the sliced food is not the desired
thickness, the control lever can be adjusted
during operation.
4
Install the lid by turning counter
clockwise, being sure it locks into place.
3
Hold the julienne disc by the 2 finger
grips, with the smaller side of the middle
hole facing UP. Install the disc on the disc
adapter by fitting the adapter through
the hole in the bottom of the disc until it
is seated against the liner.
2
Hold the slicing disc by the finger grips
and lower it onto the drive pin. You
may need to turn the disc/drive adapter
until it drops down into place.
3
Set the desired slicing thickness by
moving the control lever to the left
for thinner slices or to the right for
thicker slices.
1
Insert the liner into the attachment
assembly so that the feed tubes line
up and the liner lies flat.
4
Install the lid by turning counter
clockwise, being sure it locks into place.
W10641290A_ENv13.indd 9 5/28/14 4:32 PM