Filter
Top Products
Using your new KITCHENAID* dishwasher is simple. Follow the steps below to get
started. For more information on specific steps and additional safety information,
see the page(s) next to the step you would like to know more about.
NOTE: Before using your dishwasher, remove all hang tags, temporary labels, and
packaging materials. Please also read the entire Use and Care Guide as it con-
tains important operating and safety information.
How to use your dishwasher
1. Load the dishwasher. See pages 7-9.
5. Push door firmly when closing.
2. Spin the upper spray arm. It should turn
freely. Check the
lower spray arm
also to make sure
it turns freely.
6. Press the desired Wash Selection pad.
See the "Cycle
selection chart" on
page 14. Then press
the desired Option(s)
pad(s). See page 15
for "Option selections."
3. Add detergent. See pages 11-12.
4. Add rinse agent if needed. See page 13.
7. Run hot water at sink nearest dishwasher
until water is hot.
Turn off water.
See page 17.
8. Press the Start pad. The cycle will begin.
NOTE: The dishwasher
rememberst_helast
cycle_'nd(_ption(s)you
selected.Youonlyhave
to pressthe Startpad
youwantto usethe
same cycle and option(s).