Filter
Top Products
Removable culinary tool rack
The removable culinary tool rack allows you to wash larger items
in the mid level rack.
IMPORTANT: Remove baskets prior to removing culinary tool
rack from dishwasher.
To remove the rack
1. To access track stops, pull the rack forward until it stops.
2. Remove both baskets by lifting them out of the rack.
3. To open track stops, flip the track stop to the outside of the
track.
4.
Track stop closed Track stop open
After opening both track stops, slide front wheels up and out
of the slot in the track. Continue to pull rack forward in track
and slide the back wheels up and out of the track.
Remove front rack wheel. Remove back rack wheel.
5. Close track stops.
6. Slide rack tracks back into dishwasher.
To replace the rack
1. Gently pull culinary tool rack tracks forward in dishwasher
until they stop.
2. To open track stops, flip the track stop to the outside of the
track.
3. Place the back rack rollers on each side of the culinary tool
rack into the track slots and roll the rack back into the tracks.
4. Insert front rack rollers on each side of the rack into the track
slots and slide rack partly back into the dishwasher.
5. Close track stops on both sides of rack.
6. Install baskets in the desired position. (See "Culinary Tool
Rack.")
The mid level rack is designed for cups, glasses, and smaller
items. Many items, up to 9" (22 cm), fit in the mid level rack. (See
recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from those
in the drawings shown.
10 place setting
12place setting
• Place items so open ends face down for cleaning and
draining.
• Load glasses and cups in mid level rack only. The lower level
rack is not designed for glasses and cups. Damage can occur.