KitchenAid XP2240 Espresso Maker User Manual


 
Français
1
English
Before turning your espresso machine on, read these instructions for use carefully.
Only use an earthed socket to plug the machine in. Check that the power voltage indicated on the
nameplate of the appliance corresponds to that of your mains installation.
Do not remove the filter holder containing the ground coffee while the water is going through,
because the appliance is under pressure at that time.
Do not use the appliance if the drip tray and the grid are not in place.
Remove the plug if a problem occurs as the coffee is passing through, or before you clean the
appliance.
Do not unplug the appliance by pulling on the cord, and do not run the cord over a sharp edge or
the corner of a piece of furniture.
Ensure that the cord and your hands do not touch the hot parts of the appliance (filter holder, steam
nozzle).
Never immerse your appliance in water.
Keep the appliance out of the reach of children and do not leave the power cord hanging.
Refer to the instructions for descaling your appliance.
SAFETY INSTRUCTIONS
ESPRESSO PART
a - Espresso and coffee maker water tank lid
b - Removable espresso water tank
c - Measuring spoon
d - Cup tray
e - Espresso on/off switch
f - Function switch
f1- Coffee position
f2-Off position
f3-Steam reheating position
f4-Steam position
g - Percolation head
h - Filter holder
i - Drip tray grid
j - Drip tray
k - Multidirectional steam nozzle
l - Cappuccino accessory
FILTER COFFEE MAKER PART
A - Filter holder cover
B - Lid opening button
C - Coffee maker water tank
D - Filter holder with locking handle
E - Graduated water level in coffee maker water
compartment
F - Graduated jug
G - Hotplate
H - Receptacle for “XS1000 Duo Filter” water fil-
ter (not supplied)
I - Filter coffee maker on/off button
DESCRIPTION
We appreciate your trust in and your loyalty to Krups products. Your machine is equipped with a filter
holder which boasts three exclusive systems:
- One for the gradual tamping of the espresso ground coffee as the filter holder is being positioned
(KTS "Krups Tamping System").
- Another is for ejecting the used grounds.
- The last is for using E.S.E. (Easy Serving Espresso) or soft pods.
It is also removable, and so can be frequently cleaned to be maintained in perfect working order. For your
safety, your filter holder is equipped with a locking system to keep it in place when the pressure rises.