Filter
Top Products
12
MAINTENANCE
CAUTION: NEVER PUT YOUR HAND INTO THE AREA HOUSING THE FAN WHILE THE
FAN IS OPERATING.
For optimal operation, clean range hood surface, stainless steel filter, and oil container
regularly.
To Clean Hood Surface
CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.
-
Regular care will help preserve its appearance.
1) Use only mild soap or detergent solutions. Dry surfaces using soft cloth.
2) If hood looks splotchy (stainless steel hood), use an orange base cleaner to clean the
surface of the hood. Avoid getting cleaner on the control switches. Spread a light coating
over the surface of the hood and leave on for a few minutes (do not leave on too long or
this may cause damage to hood finish). Use soft towel to wipe off the cleaning solution,
gently rub away stubborn spots. Use a slightly damp towel to get rid of any cleaning
solution. Use dry soft towel to dry the hood.
3) To bring glow back into a stainless steel finish, use a stainless steel cleaner.
4) DO NOT allow deposits to remain for long periods of time.
5) DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the
surface causing rust.
6) DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain
in contact with stainless steel for extended periods. Many of these compounds contain
chemicals, which may be harmful. Rinse with water after exposure and wipe dry with a
clean cloth.
To Clean Stainless Steel Filter / Oil Container
CAUTION: DRAIN OIL CONTAINER BEFORE OIL CAN OVERFLOW.
1) The oil container attached underneath stainless steel filter can be removed by turning
counter-clockwise.
2) To clean the stainless steel filter, remove the screws (leave in a safe place), and slide
stainless steel filter out.
3) Both oil container and stainless steel filter should be washed with warm soapy water
and dry thoroughly before returning in place. Both are top rack dishwasher safe.