Filter
Top Products
- 12 -
Description of functions
Setting the clock
After inserting the mains plug into the
socket, open the microwave door. The
LED display reads "1:00". The oven emits
an acoustic signal and switches into
standby mode.
1. Press the button w „Clock/Kitchen
Timer“ for ca. 3 seconds. In the LED
display, the 24-hour modus is shown
by „Hr 24“ If you want to change to
the 12-hour modus, press the button
w „Clock/Kitchen Timer“ once more.
In the LED display the 12-hour modus
is shown by „Hr 12“.
Cookware
Micro-
wave
Grill
Combi-
nation
Heat-resistant
glass
Yes Yes Yes
Not heat-resistant
glass
No No No
Heat-resistant
ceramic
Yes Yes Yes
Microwaves
suitable
plastic tableware
Yes No No
Kitchen roll Yes No No
Metal tray-
/plate
No Yes No
Metal rack O
No Yes No
Kitchen foil &
Foil container
No Yes No
Turnable grill
plate Q
Yes Yes Yes
2. Turn the control knob T, to program-
me in the hours.
3. Press the button w „Clock/Kitchen
Timer“and the minute details blink in
the display.
4. Turn the control knob T, to program-
me in the minutes.
5. To finish, press the button w „Clo-
ck/Kitchen Timer“.
Note: When you press the button
"Cancel/Stop/Childlock" e , the
appliance returns automatically to
standby status.
Setting the kitchen timer
The microwave has a kitchen timer,
which you can use independently
of microwave operation.
1. Press the button w „Clock/Kitchen
Timer“ when the appliance is in
standby/cooking operation. In the
LED display „0:00“ appears, the colon
flashes and the red clock symbol
lights up.
2. Programme in the time with the
control knob T.
You can select any time range from 5
seconds to 95 minutes.
3. Press the button r „Start/Quickstart“.
An acoustic signal sounds and the
time starts to count down.
KH 1166
IB_long_KH1166_E5166_EN.qxd 19.06.2007 14:14 Uhr Seite 12