KRAMER: SIMPLE CREATIVE TECHNOLOGY
Install the Kramer RK-1UTB/T Under the Table Enclosure
6
3. Slide the TOOL with the attached bracket so that the TOOL front panel
faces the TOOL opening on the RK-1UTB/T and the “L” shaped bracket
hole faces the TOOL bracket screw hole on the RK-1UTB/T front panel
(see
Figure 4
).
Figure 4: Sliding the TOOL
4. Fasten the fixed bracket to the left side of the TOOL
1
and fasten the
attached “L” shaped bracket to the front panel of the RK-1UTB/T
2
Figure 5
(see
).
Figure 5: Attaching the TOOL to the Brackets
1 The left side when front panel is facing you
2 Through the TOOL bracket screw hole on the RK-1UTB/T front panel