Filter
Top Products
aroma
aroma
Display
for 4-12 cups of
coffee; delivers
a stronger,
more
stimulating
coffee, with a
powerful
aroma
for
1-3
cups of
coffee; full
flavor and
aroma
Approximately 4 seconds after you
have made your aroma selection, the
time will reappear in the display
window. Please note that the
last-
selected aroma setting will remain in
memory until manually changed to a
different selection.
U To begin the brewing process, press
the “ON/OFF” button
*
(~1.
The
indicator light will illuminate,
indicating the brewing process has
begun (see
figure
11).
;_
:.
This feature allows you to pre-warm
the carafe before the brewing process
begins. Follow the steps in “Filling the
Water Chamber” and “Putting in the
Ground Coffee”.
To start the process, select the coffee
strength you desire using the “aroma”
button
ZTr
(k).
Within 6 seconds, press
the carafe pre-warm button
f
(il. The
display will say “on”. Press the
5
button
(p).
The indicator light will flash,
indicating that you have chosen to pre-
warm the carafe. Pre-heating takes
approximately 5 minutes, after which
the brewing process will automatically
begin. Once the carafe is pre-heated,
the indicator light will stop flashing,
but remain solid red.
A
Note!
Once you press the carafe pre-warm
button, the function is stored in
memory. The next time you make
coffee, the carafe will automatically be
pre-warmed.
The function can be cancelled by
pressing the carafe pre-warm button
during the pre-warm stage. The light
will then remain solid red. Carafe pre-
warming is automatically cancelled in
the event of a power shortage or
removal of plug.
When the brewing cycle is complete,
the last drop to leave the filter seals the
opening within the lid of the carafe.
When pouring, the stream of coffee
forms a seal on the carafe lid so the
remaining coffee is in an airtight
container. This reduces evaporation
and heat loss, and protects the aroma
and freshness of the coffee.
10