Filter
Top Products
The AM or PM indicator will be
illuminated and should you pass the
time you wish to set, just hold in the
“auto” button
G
(q)
until desired
time is reached.
4. To lock in the time, simply press the
“time” button
fi
(n)
again (Note:
the time will automatically set in
after 4 seconds). The flashing dots in
the LCD display will confirm that the
time has been properly set.
ingcoffee
Before making your first pot of
delicious coffee, we recommend
operating the coffee maker once or
twice with water only, without ground
coffee or a paper filter to remove any
possible dust.
Be sure that the water container is
empty. Remove literature, etc. if
inserted in the water container.
The lid of the glass carafe must be
properly positioned during the brewing
process. Position the lid over the carafe
and snap the rectangular piece onto
the handle. The lid is then locked in
place.
Make sure that the swing away filter
(c)
is properly closed during the brewing
process. When closing the swivel filter
you will feel a noticeable resistance
between the swivel filter and the base.
Push in firmly until you hear the filter
“click” into place.
Caution: If the swivel filter is not
completely closed, the “Stop’n Serve”
trigger will not function properly,
8
which may cause hot water or hot
coffee to overflow.
The “Stop’n Serve” mechanism is
opened as long as the glass carafe is
inserted into the machine and sits
properly on the warming plate and the
’
swivel filter is properly closed.
ng
the
Water
Chamber
W
Open the hinged lid (see figure
3).
W
Pour in the desired quantity of water
(see figure
5).
n
The water level indicator shows you
how much water you are filling into
the container (see figure
61.
The amount of freshly brewed coffee
delivered after the brewing process will
always be slightly less than the amount
put into the water container. This is
due to the minimal absorption of the
water by the ground coffee. Therefore,
put in a little more water to begin with
so that you will have the number of
cups you desire.
Replace the carafe on the warming
plate with the glass carafe lid in
position.
Inserting/Changing the
j
“NaturActiv’
Fikr
To insert or change the
“NaturActiv”
filter, remove the plastic filter housing
(r)
from inside the water chamber.
n
Remove the bottom portion of the
housing (see figure
1).