1
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
OBSERVE ALL FEDERAL, STATE AND LOCAL CODES AND ORDINANCES
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing
Property damage, personal injury or death.
Do not store or use gasoline or other flammable vapors and liquid in the vicinity of this or any other appliance
WHAT TO DO IF YOU SMELL GAS
1. Do not try to light any appliance
2. Do not touch any electrical switch
3. Do not use any phone in your building
4. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions
5. If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agent or gas supplier.
Read this instruction booklet before installing and using the appliance
The Manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation
or improper use of this appliance
The manufacturer reserves the right to make changes to its products when considered necessary and useful, without
Affecting the essential and operating characteristics.
This appliance has been designed for non-professional, domestic use only!
INDEX………………………………………………………………………………… Page 1
Gas installation requirements ……………………………………………………… Page 2
Electrical installation requirements………………………………………………… Page 2
Dimension and Distance Requirements……………………………………………. Page 3
Overall and Cutout Dimensions……………………………………………………. Page 4
Gas tubing and Electrical location …………………………………………………… Page 4
Installing the Cooktop……………………………………………………………… Page 4-5
Gas connection ………………………………………………………………………… Page 5
Electrical connection………………………………………………………………….. Page 6
Room Ventilation……………………………………………………………………… Page 6
Cooktop L.P Gas Conversion…………………………………………………………. Page 6-7
User Instructions……………………………………………………………………… Page 8
Maintenance – Warranty and Service Information………………………………….. Page 9
Wiring Diagram- parts identification…………………………………………………… Page 9