13
Pay attention now, the display will indicate the message “READY -
SEL.PRODUCT“ and at this point it will be possible to dispense the desired
drink by pressing the corresponding button.
INSTRUCTIONS FOR ROUTINE CLEANING
In order to keep the machine efficient and ensure a long lasting
duration, it is sufficient to take some simple precautions.
When switching the machine on, every now and then during the
course of the day and before switching it off, clean the mixer
by pressing the rinse button.
Every day, at the end of the day,
disassemble the parts that compose
the mixer unit (‘X’, ‘Y’, ‘Z’, ‘K’, ‘J’ and
the internal plastic impeller ‘W’) and
therefore wash them with hot water.
The figure is only an example;
the shape of the elements may
vary according to the product
to be mixed.
14
Periodically wash the water tank and replace the water.
Using a soft cloth damp with warm water, clean the outside of the softener
filter and the intake tube to which it is fitted.
N.B.: The softener filter operates correctly up to 35 litres of water,
after which it must be replaced.
The machine will indicate on the display the end of the recommended filter
autonomy; after replacing the filter to reset the message, press and keep
pressed the rinse button of mixer A.
Clean the inside of the canister compartments.
Under no circumstances proceed by disassembling the machine.
DESCALING
Periodically it may be useful to descale the circuit using a specific product for
coffee machines, of the NON TOXIC type. Normally available in major
stores.
Warning! Under no circumstances use vinegar for descaling.
After using the product, thoroughly wash the water tank and rinse the circuit
by dispensing water only continuously, using a few times the maximum capacity
of the water tank.