Filter
Top Products
3. General specifications
3-7
3.2.4 Fnet LED signal name and indication content
Device
type
LED
Name
Meaning of LED indication LED On LED Off
RUN Indicates the status of CPU module and interface Normal Abnormal
LAS
Indicates that communication module is performing LAS
function.
In proceeding
TOKEN Indicates whether communication module has token or not. Has
Does not
have
Tx/Rx
Indicates whether communication module is transmitting/
receiving or not.
Flicker during
communication
K7F-FUEA
K7F-FUOA
K4F-FUEA
K3F-FUEA
GOL-FUEA
FAULT Indicates the status of communication module. Abnormal Normal
RUN Indicates the status of communication module. Normal Abnormal
TOKEN Indicates whether communication module has token or not. Has
Does not
have
Tx/Rx
Indicates whether communication module is transmitting/
receiving or not.
Flicker during
communication
FAULT Indicates whether communication error exists or not. Abnormal Normal
K7F-RBEA
K7F-RBOA
K4F-RBEA
SYS
FAULT
Indicates whether system error or I/O module error occurred
or not.
Abnormal Normal
PWR Indicates power status. Power On Power Off
TRX Indicates Tx/Rx or not of communication module.
Flicker during
communication
G0L-SMQA
G0L-SMIA
G0L-SMHA
ERR Indicates communication error or not. Abnormal Normal
* For details on LED, see Appendix A1, LED indication.
3.2.5 Fnet station number setting
!"#
Applied
Device type
Detailed drawing of
station number switch
Description
K7F-FUEA
K7F-FUOA
K7F-RBEA
K7F-RBOA
K4F-FUEA
K4F-RBEA
K3F-FUEA
G0L-FUEA
G0L-SMQA
G0L-SMIA
G0L-SMHA
(1) Station number can be set from 0 to 63(Decimal).
(2) Station number setting
(Factory default is 0)
(3) GM6 : The station setting switch is placed in the case.
Switch Setting
X 10 Sets ten’s figure of station number
X 1 Sets one’s figure of station number