Filter
Top Products
30
HOW TO USE
ENGLISH
Connect
The Connect button, when used with the LG
Smart Refrigerator smart phone app, allows
the refrigerator to connect to your home’s Wi-
Fi network. Refer to the following page for
information on the initial setup of the application.
The Connect icon allows you to check the status
of the refrigerator’s network connection. When
the refrigerator is connected to the network, the
Connect icon is illuminated.
Press and hold the Connect button for 3 seconds
to connect to the network. The icon will blink
while the connection is being made, then turn
on once the connection is successfully made. To
disconnect, press and hold the button again.
Smart Grid
Press the Smart Grid button to turn the Smart
Grid function On/Off. When the function is on,
the icon will illuminate. The Smart Grid function
automatically turns on when the refrigerator is
connected to the Wi-Fi network.
When the refrigerator is responding to a Demand
Response (DR) message from the electric
company, the Grid text will illuminate.
Power Saving Mode
When the refrigerator is in the
y
Power Saving
Mode
, the display will remain off until a door
is opened or a button is pressed. Once on,
the display will remain on for 20 seconds.
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the
refrigerator and freezer sections to conserve
energy while on display in a retail store. When
activated, OFF will display on the control panel
and the display will remain on for 20 seconds.
To deactivate / activate:
With either refrigerator door opened, press
and hold the Refrigerator and Ice Plus buttons
at the same time for five seconds. The control
panel will beep and the temperature settings
will display to confirm that Display Mode
is deactivated. Use the same procedure to
activate the Display Mode.