Open as PDF
HOW TO USE
To remove the Door-in-Door case, lift up
and pull out.
To replace the Door-in-Door case, line the
tabs on the Door-in-Door case with the
slots on the door and push down until it
snaps into place.
To open the Door-in-Door case, slightly push
the marked area to pop it open. The Door-in-
Door Case is removable for easy cleaning and
The InstaView function on the Door-in-Door lets
you see if you’re running low on frequently used
items like beverages and snacks, without opening
the refrigerator door.
Knock twice on the glass to turn the LED
light inside the Door-in-Door on or off.
The LED light turns off automatically after
The InstaView Door-in-Door function is
disabled when the right refrigerator door
is open, for two seconds after closing the
door, and when the ice dispenser is in use.
Knock near the center of the glass.
Knocking near the edges of the glass may
not activate the InstaView Door-in-Door
Knock hard enough that the knocking
sound is audible.
The InstaView Door-in-Door function may
activate if a loud noise occurs near the