Liebherr 7083-103-00 Kitchen Entertainment Center User Manual


 
10
Levelling the appliance
1. Adjusttheheightofthe
applianceatthefrontby
twisting the adjustable
feet
1
(A/F27). Use
theopen-endedspanner
provided.
Caution!
The front feet of the ap-
pliance must be firmly
placed on the floor.
2. Adjusttheheightoftheappliance
attherearbyturningtheadjusting
bars
2
.
 Turn the adjusting barsclock-
wiseuntilthecompressormount-
ingplatetouchestheanti-tipping
bracket.
Before fitting the door panels
Removethecover
1
andunscrewtheattachmentbracket
2
fromtherefrigeratordoors.Theseattachmentbracketswillbe
mountedontotherefrigeratordoorpanels.
Important!
The securing nuts are needed for re-mounting the pre-
assembled door panels onto the refrigerator doors.
Unscrewtheattachmentbrackets
3
fromthefreezerdrawers.
These attachment brackets will bemounted ontothe freezer
panels.
Important!
The screws are needed for re-mounting the pre-assembled
freezer panels onto the freezer drawers.
Adjusting the front of the drawer
Ifrequired,thefrontofthefreezerdrawerscanbeadjusted.
Transferthescrewsshownintheillustration(ontheleftandright
sidesofthefreezerdrawer)individuallytothelongslotsbelow.
Tightenthescrewsinthefrontofthedraweronceitisinthe
rightposition.
Side view of the freezer drawer
pulled out
Fasten the appliance in the recess
screws
(4x16mm)
Fasten the appliance in the
recess through the upper and
lowerhingesoftherefrigerator
doors.
Use2screwsforeachhinge.