14
refrigeraTor ComparTmenT
To remove the vegetable drawer
Pull the drawer straight out, grip at the back and lift
out - Figure 14.
To install the vegetable drawer
Place the drawer on the rails. The rails must be fully
extended and aligned with the front of the drawer.
Slide the drawer in.
Figure 14
Removing the shelves - Figure 11
1. Follow the first three steps in the chapter above.
2. Lift the shelf down and stop just over the upper
vegetable bin.
3. Move the front of the shelf upwards until the
shelf is in a vertical position.
4. Turn the shelf counterclockwise and remove.
To avoid it falling down, always hold the
shelf with both hands when removing.
Repositioning the shelves - Figure 10
1. Hold the shelf underneath with your hand
to avoid from tipping down backwards when
removing.
2. Lift the shelf at the front.
3. Remove the shelf forward until the circular cutout
of the shelf is in line with the front supports.
4. Lift the shelf up or down and replace in the
desired position.
Figure 10
Front supports
Figure 11
If you need space for large bottles and con-
tainers.
Place the shelf rails
provided on the sup-
ports on the left and
right at the desired
height - Figure 12.
Insert the glass shelves
as shown in fig. 13.
The glass shelf with the
raised edge must go at
the back.
If you need to make
space for tall contain-
ers, simply slide the
front half of the sec-
tioned glass shelf care-
fully underneath the
back half - Figure 13.
Figure 12
Figure 13
refrigeraTor ComparTmenT