Filter
Top Products
15
refrigeraTor ComparTmenT
Figure 16
IMPORTANT
The glass plate must be inserted to the back
completely, otherwise it is not possible to click
the cover into place correctly.
Figure 15
Figure 17
Interior Light
This turns off automatically after the door has been
opened for approximately 15 minutes. If it does not
turn on when the door is opened briefly, but the
temperature display is working, the bulb(s) may be
defective.
The light is located behind the cover located at the
top of the refrigerator compartment and has two
bulbs.
Bulb data:
125-130 V, maximum wattage - 25 W
Bulbfitting-E14
Current and voltage must agree with details on the
model plate.
Replacing the bulb:
To prevent possible injury due to an elec-
trical shock, be sure to disconnect the
power cord or turn off the circuit breaker
before replacing the interior light bulb(s).
To prevent possible injury due to broken
glass, use hand protection when replacing
the interior light bulb(s).
2. Remove the glass
plate - Fig. 16.
1. Unlatchcarefullythe
cover at left, middle
and right using a
screwdriver - Fig. 15.
Remove the cover.
3. Remove the defective
bulb. Make sure the seal
(Fig. 17) is placed on the
new bulb before installing it.
4. Install glass plate and
cover.