Filter
Top Products
12
fig. E
fig. F
8. Remove the adjusting pins (bottom of the refrigerator door)
until these touch the attachment bracket (fig. E).
9. Screw on the securing nuts and tighten (fig. F).
11. Click the top and bottom covers into place
1 (fig. H)
Insert the cover strip provided 2 between refrigerator door
and panel.
fig. H
fig. G
10. Undo the three screws on the top of the attachment bracket,
adjust the door panel as displayed in fig. G and then retighten
the screws. The same procedure can be carried out for the
bottom attachment bracket.