Filter
Top Products
Fasten the appliance in the
recess - Figure 20
Fasten the appliance in the recess through the
upper and lower hinges of the refrigerator doors.
Use 2 screws for each hinge (Figure 20).
Leveling the appliance - Figure 19
1. The height can be adjusted in front by twisting
the leveling feet
1
.
2. Twist the adjusting bolt
2
to set up the back of
the appliance.
3. Rotate leveling feet
1
until firmly in place
against the floor.
To prevent the appliance from tipping
forward the leveling feet
1
(Figure 19)
must have contact with the floor.
4. Align appliance with sides of kitchen cabinets by
adjusting leveling feet and the supports.
Figure 19
5 mm socket
27 mm wrench
screws
ø = 5/32" (4 mm)
length = 5/8" (16 mm)
Before mounting the door panels
- Figure 21
Unscrew the upper attachment brackets of both
refrigerator doors (Figure 21).
Unscrew the hex nuts and remove the brackets.
These brackets will be mounted onto the
refrigerator door panels.
Figure 21
Figure 20
14
INSTALLATION