Filter
Top Products
17
r
eversing
The
Door
hinges
8
9
WARNING!
Do not move the front section of the soft
stop mechanism in the direction indicated
when the safety bracket has been removed.
The hinge may be closed suddenly by the
strong integrated spring mechanism. This
can cause serious hand or finger injuries.
7
7. Remove red safety bracket.
8. Compress the cover in center and release.
Remove cover.
9. Transfer plate to other side of cover.
10
10. Slide red safety bracket over
the hinge.
11. Remove screw.
12. Pivot soft stop
mechanism
outwards on the right,
pull to the right and remove.
13. Slide spacer to the left and
remove.
11
12
13
14. Rotate spacer
180° and re-fit on
the opposite side.
15. Rotate soft stop
mechanism 180° and re-fit on
the opposite side. Then secure
both parts with the screw.
16. Remove red safety bracket.
Refer to warning in point 7.
14
15
16
17
18
An arrow is visible on the inside of the
cover near its centre.
This must point upwards when fitted.
Note for fitting bottom door cover
17. Position cover and screw into place.
18. Slide red safety bracket over the hinge.