Filter
Top Products
8
o
peraTion
Operating and control elements
The electronic control panel uses touch capacitance
technology. Any function can be activated by touching
the corresponding icon.
The exact contact point is
between the symbol and its label
1
On/Offbutton(switchingtheapplianceonandoff)
2
Fan switch
3
InteriorlightOn/Offbutton
4
Display
5
Button to activate a compartment to adjust its
temperature
6
Temperature setting buttons
7
AudiblewarningOn/Offbutton
Temperature display
These symbols indicate which compartment is active so
that its temperature can be adjusted.
Uppercompartmenttemperaturedisplay
Middle compartment temperature display
Lower compartment temperature display
Symbols in the display
Alarm (symbol flashes if the temperature inside
the appliance is too high or too low)
Demomodeisactivated
Sabbath mode is activated
Setup mode is activated (activating the child lock
and adjusting the display brightness)
The interior fan runs constantly
Child lock is activated
The interior light is switched on constantly
Switching the appliance on and off
Switching the appliance on
Press the On/Off button until the temperature
display lights up.
Switching the appliance off
Keep the On/Off button pressed for approx. 3 seconds
so that the temperature display goes out.
Demo mode
Demomodecanbeactivatedforpresentingtheappli-
ance at exhibitions or in salesrooms as though in nor-
mal operating mode. DEMO appears in the display.
When in this mode, the cooling circuit is switched
off!
If this mode is activated by accident, it can be deacti-
vated as detailed below.
Press
+ for 5 seconds.
Display=
Display=
The refrigeration unit switches on. The tem-
perature display flashes.
The appliance is now in normal operating mode.