33
GEAppliances.ca
Problem Possible Causes What To Do
Food does not
broil properly
Improper rack position • See the Broiling guide.
being used.
Food being cooked in a hot pan. • Use the broiling pan and grid that came with your range.
Make sure it is cool.
Aluminum foil used on the • See the Using the oven section.
broiling pan and grid has
not been fitted properly
and slit as recommended.
In some areas the power • Preheat the broil element for 10 minutes.
(voltage) may be low.
• Broil for the longest period of time recommended
in the Broiling guide.
Control signals after You forgot to enter a bake • Press the BAKEpad and desired temperature or the CLEAN
entering cooking time temperature or cleaning time. pad and desired clean time.
or delay start
Display flashes "bAd" The installed connection • Contact installer or electrician to correct miswire.
then "linE" with a from the house to the unit
loud tone is miswired.
Safety
Instructions
Operating
Instruction
s
Ca
re and
Cleaning
Tr
oubleshooting
Tip
s
Consumer
Suppo
r
t
Surface units do
not work
There has been a main power
supply surge and/or a power
interruption and surge
• On the Control Panel, activate the Self Clean mode
(press the SELF CLEAN button)
• Wait for 30 seconds and then press the OFF button.
• The cooktop should now be ready to operate
The words “CLOSE
DOOR” flashes or
scrolls in the display
This is a normal condition.
The “CLOSE DOOR” is a reminder
message to keep the oven door
closed during broil mode
• This is normal. Keep oven door closed during broil mode