Filter
Top Products
10
The pizza tray can be opened at any time during operation by pulling out the handle on the pizza tray.
The pizza oven will automatically shut off.
Touch the pizza menu pad and the symbol of menu will be displayed.
Each time a pad is touched, a BEEP sounds to acknowledge the touch.
Enter the cooking time and touch pizza start pad and then the pizza indicator linghts and the cooking
time is displayed and then pizza cooking starts. During the pizza cooking, hot smoke or air may goes
out from the gap of the pizza tray.
When the pizza PAUSE/CANCEL pad is touched during the oven operation, the pizza stops cooking
and all information retained. To erase all information(except the present time), touch the
PAUSE/CANCEL pad once more. If the pizza tray is opened during the pizza operation, all information
is retained.
If the pizza START pad is touched and the pizza does not operate, check the pizza tray is closed
securely. The pizza oven will not start cooking until the pizza tray is completely closed or the program
has been reset.
CLEANING THE PIZZA OVEN
Always unplug the Microwave Oven & Pizza and allow the pizza oven to cool completely before
cleaning.
Pizza Tray:
Wipe surface with a soft, clean, damp cloth. Never use abrasive cleaners, as they may scratch the
surface. Do not use fork or other sharp, metal object to clean the Pizza tray, or to remove pizza, as
it may damage the pizza tray.
OPERATION PROCEDURE(PIZZA OVEN)
This section includes useful information about pizza oven operation.
1. Plug power supply cord into a standard 3-pronged 20Amp, 120V AC 60Hz power output.
2. Put pizza on the pizza tray.
3. Shut the pizza tray. Make sure that it is firmly closed.
1
2
3
4
5
6
NOTE :
When the pizza tray is opened after pizza cooking, hot smoke or air will go out and the pizza
tray is very hot.
Take out food carefully not to touch hot surfaces of the pizza oven or pizza tray or hot air.
Touch the PAUSE/CANCEL pad for pizza oven control part.
During operation of the pizza oven, pads for microwave oven control part do not work.
NOTE :
When the pizza oven is operated several times in series and is overheated, the safety thermal
switch works and the heating elements stop operating. So, though the pizza oven seems to
operate normally, it does not cook pizza.
Open the pizza tray and cool it for 4~5 min.
After then the pizza can cook normally.