Filter
Top Products
11
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “:0” and a tone will sound. If the AC power
ever goes off, the display shows “ : 0” when the power comes back on.
1. Touch CLOCK pad.
This is a 12 hour clock system.
2. Touch CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching the time set
pads in sequence.
4. Touch CLOCK pad.
5. Touch PAUSE/CANCEL pad.
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the CLOCK pad and re-enter the time.
The display stops blinking, and the colon starts
blinking. If you selected 12 hour clock system,
this digital clock allows you to set from 1:00 to
12:59. If you selected 24 hour clock system, this
digital clock allows you to set from 0:00 to 23:59.
QUICK DEFROST
Use this function to thow only. 1.0 lb of minced meat very quickly.
This will require a standing there to allow the center to thaw.
During defrosting you oven will “BEEP”, at which point open the oven door, turn food over and separate to
ensure even thawing. Remove any portions that have thawed or shield them to help slow down thawing.
After checking close the oven door and press START/EXPRESS COOK to resume defrosting.
Your oven will not stop defrosting (even when the beep sounded) unless the door is opened.
NOTE : This oven has multiple clock
systems. If you want 12 hour
clock system, omit this step.
1. Touch QUICK DEFROST pad.
2. Touch START/EXPRESS COOK pad.
The DEFROST indicator lights and “ Lb” is
blinking.
CLOCK
CLOCK
QUICK
DEFROST