MKG SERIES GAS GRIDDLE INSTALLATION & OPERATION
11
F. Check to see that the ventilation hood and make up air systems are working properly. Any make up air
system should not be directed as to impede the flow of combustion air to the griddle, or flue exhaust from the
griddle.
G. Inspect griddle surface for proper cleanliness.
5.4. TROUBLESHOOTING CHART:
The following chart may help to eliminate any basic operational problems that you may be experiencing with your
appliance. Locate the problem on the left side of the chart, and cross-reference the problem with the possible cause. Once
the problem has been identified take the appropriate action to rectify the problem.
NOTICE:
All parts and service for your MagiKitch'n griddle should be ordered and installed by a MagiKitch'n Authorized
Service and Parts (ASAP) dealer. Failure to do so might result in the warranty being voided.
POSSIBLE CAUSE
PROBLEM
Heat
Set
Too
High
Moisture
in Food
Turning
Into
Steam
Griddle
Surface
Dirty or
Un-
seasoned
Cooking
Times
Not Long
Enough
Product
Shelf Life
Expired
Product
Stored
In-
correctly
Excessive
Oil or
Fat used
on
Griddle
Surface
Heat Set
Too Low
Excessive
Smoke
From Fat
XX
Product
Sticking
XXX
Product
Edges
Burning
XXX
Product
Centers
Underdone
XX
Greasy or
Undesirable
Flavor
XXX
Grease
Build up on
Griddle
Surface
XX X
5.5. ACCESSORIES:
5.5.1. Standard:
Standard accessories that are shipped with your MKG griddle, all griddles are shipped with a set of 4" legs, black iron
piping(for gas connections), 3/4" 1/2 PSIG gas regulator, and a 3/4" shut off valve on Matchless ignition units.
Each MKG Chrome Surfaced Griddle is equipped with a Chrome Kit which includes a Cleaning Brush, Cleaning
Powder, Spatula, Scraper, and scrape blade replacements. See below table for re-order Part Nos.
CHROME GRIDDLE ACCESSORIES
Magi Kleans'r Part No. 9825-1525101
Palmetto Brush Part No. 9825-1524901
Spatula(Chrome Surface) Part No. 9825-1525001
Scraper, w/ blade and cover Part No. 9825-1528001
Replacement blades Part No. 9825-1528002