Maintenance Section 4
4-4
Part Number 000001114
Step 9 While components are soaking, use 1/2 of the
cleaner/water solution to clean all foodzone surfaces of
the ice machine and bin (or dispenser). Use a nylon
brush or cloth to thoroughly clean the following ice
machine areas:
• Side walls
• Base (bottom of the water trough)
• Interior of the water trough
• Evaporator cells and evaporator plastic parts -
including top, bottom, and sides
• Bin or dispenser
• Ice machine top cover
Remove water trough drain plug and rinse all areas
thoroughly with clean water. Reinstall water trough drain
plug.
Step 10 Mix a solution of sanitizer and warm water.
Step 11 Use 1/2 of the sanitizer/water solution to
sanitize all removed components. Use a cloth or sponge
to liberally apply the solution to all surfaces of the
removed parts or soak the removed parts in the
sanitizer/water solution. Do not rinse parts after
sanitizing.
Step 12 Use 1/2 of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and bin
(or dispenser). Use a cloth or sponge to liberally apply
the solution. Wipe all surfaces twice to ensure complete
coverage with sanitizer solution. When sanitizing, pay
particular attention to the following areas:
• Side walls
• Base (bottom of the water trough)
• Interior of water trough
• Evaporator cells and evaporator plastic parts -
including top, bottom and sides
• Bin or dispenser
• Ice machine top cover
Do not rinse the sanitized areas. Remove the water
trough drain plug and wipe with solution. When the
sanitizer solution has drained from the trough, reinstall
the water trough drain plug.
Step 13 Replace all removed components.
Step 14 Reapply power to the ice machine and place
the toggle switch in the CLEAN position.
Step 15 Wait about two minutes or until water starts to
flow over the evaporator. Add the proper amount of
Manitowoc Ice Machine Sanitizer to the water trough by
pouring between the water curtain and evaporator.
Solution Type Water Mixed With
Sanitizer 6 gal. (23 l) 4 oz (120 ml) sanitizer
Clean/sanitize top,
bottom and sides
of evaporator.
Wipe bottom lip of
evaporator with a
sponge or cloth
soaked in cleaner
and then sanitizer
solution.
Model Amount of Sanitizer
Q200 Q280 Q322 Q370
Q422 Q450 Q600 Q800
Q1000
3 ounces (90 ml)
Q1300 Q1600 Q1800 8.75 ounces (258 ml)