Filter
Top Products
-12-
4.
Press the two Ice Hopper release catches and lift
the Ice Hopper to remove (Figure 5).
PLEASE FOLLOW THE INSTRUCTIONS BELOW TO
SAFELY REMOVE THE SHAVING BLADE ASSEMBLY
FROM THE ICE HOPPER.
5. Unscrew plastic ring counter clockwise (to the left)
in front of shaving blade and remove, then remove
the Shaving Blade and store in a safe place.
(Figure 6).
BE SURE TO RINSE THE SHAVING BLADE AND DRY
THOROUGHLY BEFORE STORING.
6. Carefully lift the Blending Jar straight up to
remove. The Ice Chute is spring-loaded and can be
pushed up. If the Bending Jar is not easily removed,
rock gently and lift. Do not twist.
7. Turn the Blending Jar upside down and unscrew the
Jar Base. Carefully remove the Blending Blade, and
Blending Blade Sealing Ring.
WARNING: THE BLENDING BLADE IS SHARP.
HANDLE WITH CARE.
8. To remove the Ice Melt Reservoir hold the unit still
and pull straight out on the handle.
9. Blending Jar Lid, Blending Jar, Blending Blade,
Blending Blade Sealing Ring and Jar Base can be
safely washed in the top rack of your dishwasher.
Use only top rack. Failure to do so will result in
damage. The Ice Reservoir Lid, Ice Reservoir,
Shaving Paddle, Ice Hopper, Ice Defl ector Blade
Assembly, Shaving Blade and Ice Melt Reservoir
are only exposed to ice and water and they should
be rinsed with soap and warm water and allowed
to air dry.
10. Use a damp cloth to clean the outside of the unit.
WARNING: REMOVE BATTERY BEFORE CLEANING.
DO NOT USE SOLVENTS. NEVER IMMERSE THE UNIT
IN WATER.
ICE
DEFLECTOR
Figr 5
Figr 6