Filter
Top Products
Select Location
The proper location will ensure peak perform-
ance of your drawer refrigerator. Choose a loca-
tion away from heat and out of direct sunlight.
Best performance will be maintained when
installed within the following parameters:
Cabinet Clearance
Ventilation is required for the bottom front section of
the unit where the grille is located. Keep this area
open and clear of any obstructions. Adjacent cabi-
nets and countertop can be installed on top, back
and sides of the unit as long as grille and drawer
access remain unobstructed. An opening of 30” is
required between cabinets with a depth of 24”.
Adjacent cabinets and countertop can be installed
on top, back and sides of the unit as long as the
grille and drawer access remain unobstructed.
Ventilation is required for the bottom front section
of the unit where the grille is located. Keep this
area open and clear of any obstructions.
Make certain that the leveling legs supplied with
the drawer refrigerator are installed according to
the instructions. Leveling adjustments can be
made by raising or lowering the glides on the bot-
tom of the unit.
Important Safety Issue
A cabinet “anti-tip” device is mounted to the back
of your drawer refrigerator. If your installation is a
built-in undercounter application, you do not need
to apply this feature.If your installation is a free-
standing application with no counter top directly
above the top of the drawer refrigerator, you must
apply this feature to prevent the unit from tipping
forward when the drawers are pulled out. The
“anti-tip” device is attached at the back of each
cabinet. Please see installation instructions sup-
plied with the “anti-tip” device.
Electrical Connection
Check the serial nameplate for the correct power
supply. Use only the electrical power supply spec-
ified on the serial nameplate. Do not use an exten-
sion cord.
Grounding Method
This drawer refrigerator is equipped with a power
supply cord with ground. It must be plugged into a
mating grounding type receptacle in accordance
with the National Electrical Code and applicable
local codes and ordinances. It is the customer’s
responsibility to provide the proper grounding type
receptacle. Do not alter the plug in any way.
INSTALLATION
21.81
23.88
15.13
15.13
3.50
29.88
25.82
34.00
Ideal Ambient Temperature Range
*
built-in
freestanding
55-80°F
55-90°F
* Drawer Refrigerator will not perform correctly in ambient temperatures less than 55°F.
THIS UNIT SHOULD NOT, UNDER ANY
CIRCUMSTANCES, BE UNGROUNDED.
DISCONNECT POWER SOURCE BEFORE
ADJUSTING LEVELING LEGS
3