Marvel Industries 80RD Refrigerator User Manual


 
Control Panel
The temperature of your drawer unit ranges from
32°F to 47°F (0°C to 8°C). The temperature can
be adjusted using the control panel located on the
inside of the top drawer. To change the tempera-
ture setting, press the warmer or cooler pads until
the display shows the desired temperature. After a
few seconds the display will return to the actual
temperature of the unit. An empty unit will stabilize
in six to eight hours.
Your drawer refrigerator’s control leaves the facto-
ry preset to display its temperature in degrees
Fahrenheit. To change the display to show Celsius
temperatures, simply press the warmer and cold-
er key pads simultaneously. The display will
change within a few seconds.
The on/off key pad stops and starts the cooling of
the unit. This can be used when your drawer
refrigerator will not be used for extended periods
of time. The LED light will continue to operate
when the drawers are opened as long as the unit
is connected to a power source.
At time of initial start up the control panel display
will show “OR” or “Out of Range” until the unit
reaches the desired temperature. At any time the
unit’s interior temperature reaches 9 degrees
below or above its setpoint this code will also be
displayed.
FEATURES
TEMPERATURE CONTROL
WARMER
COOLER
ON
OFF
Gastronorm Container Systems
For additional convenience, optional Gastronorm
food storage containers can be purchased from
your dealer. These stainless steel containers can
be used to easily access smaller food items and
are dishwasher safe. For further information visit
Marvel’s website at: www
.marvelindustries.com.
Drawer Organizer
The Drawer Organizer is designed to be fully
adjustable to compensate for bottles and other
items of different sizes. The drawer Organizer can
be adjusted left and right, up and down by turning
the knob counter clockwise.
4