Filter
Top Products
©2000 Maytag Appliances Sales Company
16010107 Section 2. Electrical Components & Testing
2-1
SECTION 2. ELECTRICAL COMPONENTS & TESTING
ELECTRICAL TEST EQUIPMENT
The equipment required to service Maytag
products depends largely upon the condition
you encounter. Locating a malfunction will
often require the use of electrical testing
equipment such as:
Analog Test Meter
can be used to check for
open or closed circuits,
measure resistance, AC
and DC volts, and tem-
perature.
Clamp-On Ammeter
can be used to detect
shorts. Over-
loads on the
circuit breaker
or fuse can be
traced to either
the dryer or circuit
breaker by check-
ing the dryer
current draw.
Description Part Number
Analog Test Meter 20000005
Digital Watt/Amp/Volt/Ohm/
Temperature Meter
20000019
Clamp-On Ammeter 20000002
AC Voltage Sensor 20000081
AC Voltage Sensor
can be used to alert you
if AC voltage is present so
proper safety precautions can
be observed. The tip of the sensor
will glow bright red, if voltage is be-
tween 110-600 volts AC.
Digital Watt/Amp/Volt/Ohm/Temperature
Meter
Measures power (wattage), AC/DC volts, AC/
DC amps, temperature (C & F) OHMS resis-
tance, continuity and capacitance. Features
large LCD display w/backlight and analog
bar graph to show tendencies. Includes: AC
power adaptor for measuring wattage and
meter leads.