Filter
Top Products
Oven Light Storage Drawer
ACAUTIONS: ACAUTION:
. Disconnect power to range before replacing light bulb. • Do not store plastic, paper products, food or
flammable materials in this drawer. The drawer
. Use a dry potholder to prevent possible harm to hands
may become too warmfor these items when the
when replacing bulb. oven is in use.
. Be sure bulb is cool before touching bulb.
The storage drawer can be removed to allow you to
• Donottouchhotbulbwithadampclothasthismaycause clean under the range.
the bulb to break.
To remove:
1. Empty drawer and pull out to the first stop position.
To replace oven light bulb: 2. Lift up the front of the drawer.
1. When oven iscool, hold bulb cover in place, then slide wire
retainer off cover. NOTE: Bulb cover will fall if not held in 3. Pull out to the second stop position.
place while removing wire 8vLBCOVER 4. Grasp sides and lift drawer up and out.
retainer.
2. Remove bulb cover and _ To replace:
light bulb. -///_ _-J//2zz._(_J_ /) 1. Fit the ends of the drawer glides into the rails in the
3. Rep!acewitha40watt _ ___/_ range.
apphance bulb. _ _ 2. Liftup front of drawer and gently push into the first
4. Replace bulb cover and _Er_m_ stop position.
secure with wire retainer. 3. Liftdrawerupagainandpushuntildrawerisclosed.
5. Reconnect power to range. Reset clock.
Leveling Legs
ACAUTION:
. Be sure the anti-tip bracket secures one of the rear
leveling legs to the floor to prevent the range from
accidentally tipping.
The range should be leveled when installed. If the i_
range is not level, turn the plastic leveling legs, Jll_ .'/
located at each corner of the range, untilrangej/J//_,_,(')
J ";;;'" _ RACKEr
LEVELt_ LEG
20