Filter
Top Products
CLEAN Pad Setting the Timer
Use to set self-clean cycle. The timer can be set from one minute (0:01) up to9 hours
and 50 minutes (9:50).
For models with a manual door lock:
The timer can be used independently of any other oven
1, Close and lock oven door. activity and it can be set while another oven function is
2. Press CLEAN pad. "3:00" will appear in the display, operating. THE TIMER DOES NOT CONTROL THE
3. Oven will automatically clean for 3 hours or press OVEN.
• or • pad to select 2 to 4 hours of cleaning. 1. Press the TIMER pad.
2. Press or press andhold the • or • pad until the correct
For models with an automatic door lock:
time appears in the display.
1. Press CLEAN pad. "- :- -" will appear in the display. ° The timer will start automatically. The TIMER
2, Press • or • pad. "3:00" hours of cleaning time will
indicator on the TIMER pad will light whenever the
automatically be entered, timer is in use.
3. If more or less cleaning time is desired, press • One long beep and "End" will be briefly displayed
• or • pad to select times between 2 to 4 hours, to signal the end of the timer operation.
See pages 15-16 for additional information.
To cancel timer; Press and hold TIMER pad for three
seconds. Time of day will reappear in the display.
COOK TIME TIME Pads
Control Options
Use to program the oven to start and stop automatically.
1, Press COOK TIME pad and enter the desired cooking Clock Controlled
time. Oven Cooking Beep Option
2, Press the BAKE pad and enter oven temperature. Option 1. (default option) Four beeps at the end of
3, To delay the start of cooking, press the STOP TIME pad cooking, then, one beep every 30 seconds for the next
and enter the time you wish the oven to turn off, five minutes or until the CANCEL pad is pressed.
See page 14 for additional information. Option 2. Four beeps at the end of cooking, then, no
other beeps.
Setting the Clock Option 3. Four beeps at the end of cooking, then one
beep every minute for the next 12 hours or until the
1. Press CLOCK pad. CANCEL pad is pressed.
2. Press or press and hold • or • pad until the correct time Setting Clock Controlled
of day appears in the display. Oven Cooking Beeps
The display will flash when electrical power is first supplied
to the range or if there has been a power failure. 1. Press COOK TIME and CLOCK pads at the same
time and hold for three seconds.
To recall the time of day when another function is displayed, • A single beep will sound.
press the CLOCK pad. • Display will show current option.
Clock time cannot be changed when the oven has been 2, Press the • or • pad to select the option nnmber you
programmed for clock controlled cooking, self-clean or wish. The current time of day will reappear in the
delayed self-clean, display after four seconds.
6