Filter
Top Products
CLOCK .ND TIMER
The display will flash when the wall oven is first connectedto power or if power is
interrupted.The displaywillstopflashingoncethetime-of-day clockhas been set.
To set the time-of-day clock: To set the timer:
1. Pressthe CLOCK pad. 1. PresstheTIMER pad. 0:59 (or one hour)willappearin
the display.
2. Pressand holdthe HOUR padto set the correcthours. The timer will automaticallybegin counting clownin
Tochangethetimeby asinglehour,givethe pada short incrementsofone minute.
tap. 2. To setthetimerforlessthanonehour,pressthe TIMER
3. Press and hold the MINUTE pad to set the correct pad then press and hold the MINUTE pad until the
minutes. Tochangethe time by a singleminute,givethe desiredtime appears in the display.To change the time
pad a short tap. by a single minute, give the pad a short tap.
For example: To set the clock for 3:15, press and hold the 3. Tosetthetimer for morethan one hour,presstheTIMER
HOUR pad until 3 appears inthe hours display. Then press padthen -
and hold the MINUTE pad until 15 appears in the minutes • Press the HOUR pad, 1:59 (or two hours) will
display, appear in the display.
• Press the MINUTE pad untilthe desired minutes
appear in the display.
NOTE: Two hours is the maximum time that can be set.
4. When the time has elapsed, 0:00 will appear in the
display and continuous beeps will sound indicating the
timer has counted down.
5. Press the CLOCK pad to cancel the beeps. The current
time of day will reappear inthe display.
Tocancel the timer: Pressthe CLOCK pad and the display
will return to the current time of day.