Filter
Top Products
KEY TO THE MICROWAVE OVEN PARTS
1. Dowels
2. Glass turntable
3. Cooking grid
4. Magnetron cover
5. Turntable ring
6. Turntable shaft
7. Display
8. Control panel
a. "Microwave" button
b. "Grill" button
c. "Convection" button
d. "Combine" button
e. Selector for timer/weight/auto
menu program
f. "Defrost" button
g. "Start" button
h. "Stop/Clear/Clock" button
i. Auto menu list
PREPARING THE MICROWAVE OVEN
Each individual microwave oven is checked at the factory, but for
safety’s sake, after unpacking the oven, you should check
carefully that the microwave oven has not been damaged during
transport. Check whether there is any visible damage (e.g. in the
form of dents or similar), that the oven door closes properly, and
that the hinges are in order. If it appears that the microwave oven
has been damaged, you must contact the shop where you
bought it, and do not use it until it has been checked by an
authorised specialist.
Before using the microwave oven, you should check that you
have removed all packaging from it both inside and outside.
Positioning the microwave
The microwave oven must stand on a flat surface capable of
bearing its weight (14 kg). There must be clearance of at least 7.5
cm behind the microwave and 30 cm above to ensure sufficient
ventilation. Since the microwave oven is not suitable for integral
installation, at least one of the two sides must be left completely
open; on the other side there must be clearance of at least 7.5
cm.
Connecting the microwave oven
The microwave oven must be connected to a 230-volt AC
current, 50 Hz. The guarantee is not valid if the microwave oven
is connected to the wrong voltage. When the oven is on, a beep
is heard and the display (7) will show "0:00".
NB! The microwave oven beeps once whenever a button is
pressed.
Setting the clock
•Press the "Stop/Clear/Clock" button (h).
• The hour number "00" flashes.
•Turn the selector (e) to set the hour number; the clock is a 24-
hour clock.
•Press the "Start" (g) button to confirm the setting.
• The minute number "00" flashes.
•Turn the selector to set the minutes.
•Press the "Start" button to confirm the setting.
• The two dots between the figures will start to flash, which
means the clock is functioning.
If you accidentally press the "Stop/Clear/Clock" while setting the
clock, the microwave oven will return automatically to the
previous step.
Inserting the glass turntable
Before using the microwave oven, ensure the glass turntable (2)
is correctly seated on its roller ring (5) and spindle (6). The glass
turntable must lie on top of the turntable ring in the recess of the
microwave oven base, so that the three studs on the turntable
shaft fit between those on the base of the glass turntable.
Before using the microwave oven for the first time
The first time the microwave oven is used, a small amount of
smoke and smell may be emitted. This is due to oil residue from
manufacture and is neither abnormal nor dangerous. Smells can
be eliminated by starting the grill program and letting it run for a
few minutes. Smells and smoke should disappear as a result.
Repeat the procedure if this is not the case.
OPERATING THE MICROWAVE OVEN
Basic operation
• Place the food to be cooked in the microwave oven and
close the door. Select cooking function as described below
and start the microwave oven. Once the cooking time set has
elapsed, the oven will switch off automatically. The display
returns to clock function, or shows "0:00" if the clock has not
been set, and 5 beeps sound.
• Cooking can be temporarily interrupted at any time by
pressing the "Stop/Clear/Clock" button. If you press the
button twice, the cooking time and the program selected will
be cancelled.
• Cooking can also be temporarily interrupted by opening the
door (practical if the food needs turning).
• It is possible to set programs or the timer while the oven door
is open, and cooking is temporarily interrupted.
• When cooking is temporarily interrupted, one or more
function indicators will show on the display, and the clock will
show the remaining cooking time. Cooking can be resumed
by closing the oven door and pressing the "Start" button
again. If you do not press the "Start" button again within 5
minutes, or if you press the "Stop/Clear/Clock" button again,
the microwave oven goes back to clock function.
• During cooking using a program, 30 seconds can be added
to the cooking time at any time by pressing the "Start"
button.
• If you accidentally press the "Stop/Clear/Clock" while setting
the program function, the microwave oven will return
automatically to the previous step.
• If the oven door is open, the light will switch off automatically
if no buttons are pressed for 10 minutes.
21
1
7
2
3
56
8
4
e
a
b
c
d
f
g
h
i
753130_IM 11/11/05 10:48 Side 21