Melitta MEPE123B Espresso Maker User Manual


 
7. After a couple of minutes
the Green “GO” Light
illuminates. Turn the
Function Selector (on
the side) to the
“COFFEE CUP”. This
starts the water flowing.
6
Before First Use (continued)
Green
“GO”
Light
Function
Selector
COFFEE
position
Function
Selector
NEUTRAL
position
Let approximately 2 ounces of hot water drain into the heat proof
container you placed on the Cup Rest Grill. There will be some
run-off water in the Water Overflow Tray. This is normal.
Then turn the Function Selector back to the “NEUTRAL” position.
CAUTION: YOU MUST STOP THE WATER FLOW BY TURNING
THE FUNCTION SELECTOR TO “NEUTRAL.” THE WATER
FLOW DOES NOT STOP AUTOMATICALLY.
8. When the water stops flowing from the coffee spout, carefully
dispose of hot water in the cup and the Water Overflow Tray. Your
123 Spresso is now ready to use.