Filter
Top Products
3. Remove baskets by slightly spreading chains, sliding
basket to one side and lifting out.
4. Release the tension spring from spring bracket on both
sides of tension bracket on both sides of tension
assembly.
5. Locate the master link (link without extended pins-
illustration 8). Remove clip on master link (Illustration
9) and remove. Pull chain out from bottom.
6. With extended pins facing inward, drape new
chain over the top of the coupling assembly. Make
certain links of chain are meshed over sprocket
teeth. Drop remainder of chain behind sprocket and
from bottom opening, lift it across transmission
assembly and tension assembly sprockets. Visually
check for fit over sprocket teeth and bring two ends
of chain together. Install master link and clip.
Repeat procedure for other chain. IMPORTANT!
Align right and left side master links to insure
proper alignment of baskets. (Illustration 10)
7. Replace baskets, spring on tension brackets, front
baffle, receiving tray, delivery chute and left and
right side panels.
5