Middleby Marshall PS528G Oven User Manual


 
32
SECTION 4
MAINTENANCE
6. To remove the inner plate, pull the plate out and then up.
Figure 4-11.
7. The outer nger plate is stainless and may be cleaned
by either soaking in a hot, strong detergent solution or
using a caustic cleaner. The conveyor belt can also be
cleaned in the same way.
Figure 4-12. Standard Lower Finger
Figure 4-13. Standard Upper Finger
C. Reassembly of Air Fingers
1. Air ngers are made up of one inner plate, one outer
plate and the nger housing manifold. Be sure to match
up the markings (T1, T2, T3, etc.) on all the parts of the
air ngers as you are reassembling.
Figure 4-14.
2. Reassemble the inner plate. Keep your ngers clear
so you won’t pinch them. The inner plate of a nger will
only go in one way because of its design.
3. Replace the outer plate by placing your hands at on
the top of the plate and pushing down. Keep your ngers
clear so you won’t pinch them.
Figure 4-15.