What if ... Possible fault Fix
shortly after starting a
program, the dishwasher
stops running and the
optic indicator flashes?
Water intake error.
The "Intake / Drain"
indicator flashes.
–
Turn off the dishwasher.
–
Open the water valve.
–
Clean the water inlet
filter, see maintenance
instructions.
–
The water pressure is
less than 4.5 psi
(0.3 bar).
Contact a plumber.
Drain error. Water remains
in the wash cabinet.
The "Intake / Drain"
indicator flashes.
–
Turn off the dishwasher.
–
Clean the triple filter.
See maintenance
instructions.
– Clean the drain pump
and the non-return
valve, see maintenance
instructions.
– Remove any kinks in
the drain hose.
after a program has
ended, the optic
indicator and the
program indicators
flash?
There may be a technical
fault.
– Turn the dishwasher off.
Despite the problem the
dishwasher can be used.
If the indicator lights flash
again after the next
program cycle, call the
Miele Technical Service
Department.
there is a knocking
noise in the wash
cabinet?
The spray arm is hitting
an item in the basket.
Interrupt the program and
rearrange items blocking
the spray arms.
there is a rattling noise? Items are not secure in
the wash cabinet.
Interrupt the program and
rearrange loose pieces.
there is a knocking
noise in the water
pipes?
This may be caused by
the installation or the
diameter of the pipe.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Frequently asked questions
38