Filter
Top Products
A range of Miele cleaning and
conditioning agents is available from
the Miele UK Spare Parts Department
or via the internet at
www.miele-shop.com.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
For stainless steel surfaces, use a
suitable stainless steel conditioning
agent.
Make sure that no water can
penetrate into the electronic unit or
into the light.
Do not use steam cleaning
apparatus to clean this appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^
Switch the appliance off, switch off at
the socket and remove the plug.
^
Take any frozen food out of the
appliance and store it in a cool place.
^
Take the freezer drawers and the
glass cold plates out of the freezer to
clean them.
Cleaning the outer casing, the
interior and accessories
Use warm water with a little washing-up
liquid. Wash all accessories and
drawers by hand only. Do not wash in a
dishwasher.
^
After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the door open to air the
appliance for a short while.
^ Clean stainless steel surfaces with a
proprietary stainless steel cleaning
agent, following the manufacturer's
instructions on the packaging.
^ After cleaning, stainless steel
surfaces should be treated with a
conditioning agent for stainless steel.
It is important to do this every time
the stainless steel surfaces are
cleaned, as the stainless steel
conditioner protects the surfaces
and helps prevent re-soiling.
Ventilation gaps
^
The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Cleaning and care
24