Filter
Top Products
^
Push short trim m into the gap at the
top of the appliances. Make sure that
the gap in the trim faces the front.
The trim must sit flush with the top of
the appliances at the front.
^ Fit cover n in the space between the
control panels. Make sure that the
outer edges of the cover are flush
with the control panels. The cover
can be pulled out to adjust it to the
right size.
The gap in the cover must face
downwards to fit properly over the
long stainless steel trim.
^
Refit cover.
Please align the handles on both
doors if necessary. See "Changing
the door hinging".
Installing in a side-by-side combination
37