Filter
Top Products
^
Remove cover a by pulling it
forwards.
^
With the help of another person,
carefully tilt the appliance backwards
and pull hinge pin b out.
^ Do not lose hinge bush c.
^ Undo screws d and take hinge plate
e off.
^ Remove cover f and fit it into the
holes on the opposite side.
^ Unscrew bearing g from hinge plate
e and screw it into the hole on the
other side of hinge plate e.
^
Screw hinge plate e into position on
the opposite side using the two outer
long slots only. Do not use the middle
hole because you will not be able to
align the door later on.
^ Using a second person, carefully tip
the appliance backwards and then fit
hinge pin b together with hinge bush
c from below into hinge plate e on
the left hand side.
^ Refit cover a on the left.
^ Place the door onto hinge pin b.
^
Close the appliance door.
Changing the door hinging
40