Filter
Top Products
Unsatisfactory results
Problem Possible cause and remedy
The consistency of
the milk froth is
unsatisfactory.
The milk temperature is too high. Good milk froth can only
be achieved when cold milk (below 13°C) is used.
^
Check the temperature of the milk.
The milk pipework is blocked.
^
Clean the central spout with integrated cappuccinatore
and the milk pipework with the cleaning brush.
The coffee grinder
makes a louder
noise than usual.
The coffee bean container has become empty during the
grinding process.
^ Fill the container with fresh beans.
There may be stones in amongst the coffee beans.
^ Switch the coffee machine off immediately. Call Miele.
Espresso or coffee
flows into the cup
too quickly.
The coffee is too coarsely ground.
^ Set the grinder to a finer setting (see "Setting the coffee
grinder").
Espresso or coffee
flows into the cup
too slowly.
The coffee is too finely ground.
^
Set the grinder to a coarser setting (see "Setting the coffee
grinder").
The coffee or
espresso is not hot
enough.
The cup has not been pre-heated.
The brewing temperature has been set too low.
^
Set a higher brewing temperature (see "Brewing
temperature").
The filters in the brew unit are blocked.The filters in the brew
unit are blocked.
^
Remove and clean the brew unit by hand (see "Cleaning
and care – Brew unit").
^
Degrease the brew unit (see "Cleaning and care - Brew
unit").
Problem solving guide
59