Filter
Top Products
Installation
36
Use a kni
fe to release the four
spacers and the two covers from the
spacer frame supplied.
Use the space fr
ame as a drilling
template. Place it on the ceiling with
the arrows pointing forwards. Using
the notches, align the spacer frame
on the intersecting lines and make
pencil marks for the drill holes.
Drill four holes 10 mm, appr
ox. 115
mm deep for the plugs supplied.
Place the four plugs in the holes and
scr
ew in the 4 screws so that they
protrude by approx. 30 mm.