Filter
Top Products
To delay the start time of the
Pyrolytic cleaning programme
Start the programme as described
above and then set the required finish
time within the first five minutes of
starting the programme.
^
Press OK.
^
Press W repeatedly until S starts
flashing.
The display will then show the finish
time calculated from the current time of
day plus the duration of the selected
Pyrolytic cleaning programme.
^ Press OK.
The hours will flash.
^ Set the hours using the W sensor.
^ Press OK.
The minutes block will flash.
^ Set the minutes using the W sensor.
^ Press OK.
The finish time is now set and has been
saved to memory.
The oven heating will now switch off.
The finish time can be changed at any
time up until the start time for the
programme.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on. The duration will show in
the display.
At the end of the Pyrolytic cleaning
programme
0
:
00
T0
0:00, 0 and T will appear in the
display to start with.
The door is locked as long as the 0
symbol is lit up. The 0 symbol will start
flashing as soon as the door lock has
been released.
0
:
00
T
When the door lock has been released
– the 0 symbol will go out,
– the S symbol will start flashing,
– short beeps will sound if the buzzer
tone is activated (see "Clock/Timer -
altering settings").
^
Turn the function selector to 0.
The visual and acoustic signals are
switched off.
,
Danger of burning
Wait until the oven has cooled down
before removing residual soiling left
in the oven cavity from the Pyrolytic
cleaning programme.
Cleaning and care
75