Filter
Top Products
Stainless steel
The ceramic and stainless steel hob
cleaner is suitable for cleaning stainless
steel surfaces (see "Optional
accessories").
To help prevent resoiling, we
recommend a stainless steel
conditioner (see "Optional
accessories").
Apply sparingly with a soft cloth.
Do not use a stainless steel cleaning
agent on printed surfaces. This
would rub off the print. These areas
should be only cleaned with an
E-Cloth or with a solution of warm
water and a little washing-up liquid
applied with a soft sponge.
Rack and lava rock container
Wash the rack and lava rock container
after every use in hot water with a little
washing-up liquid. If the rack is heavily
soiled it should be soaked first and then
any soiling can be removed using a soft
brush.
If the lava rock container is heavily
soiled a non-abrasive stainless steel
spiral pad can be used together with a
little stainless steel cleaning agent.
Leave to dry thoroughly after cleaning
them.
Do not use conditioning agents for
stainless steel in the lava rock
container.
Heating elements
Use a scouring sponge to clean any
residues left on the heating elements.
Lava rocks
Clean the lava rocks regularly.
Soak them in a suitable container in hot
water with a little washing-up liquid,
then swirl them around in the water
several times. Pour away the dirty
water, and rinse 2 or 3 times in clean
water. Lay the rocks out to dry on a
suitable towel.
Washing lava rocks removes the
outer used layer. The speed with
which the lava rocks wear down will
depend on how often they are used
and for how long.
If the lava rocks in the container are
reduced by half, they should be
replenished.
Cleaning and care
20