Filter
Top Products
What if the combiset turns itself off automatically?
Possible fault Solution
Either the "Safety cut-out" feature or the
"Overheating protection" feature has
been activated.
See "Overheating protection" or "Safety
cut-out".
What if one of the following errors occurs:
- The booster function turns off automatically ahead of time.
- C and 0 flash alternately in the display.
- H is shown in the display.
Possible fault Solution
The overheating protection feature has
been activated.
See "Overheating protection".
The food does not cook when using the Auto-heat function.
Possible fault Solution
Large amounts of food are being
cooked.
Select a higher continued power level
or begin cooking at the highest level
and turn the power back by hand.
The pot or pan does not transfer the
heat properly.
Use the correct pots and pans, see
"Cookware".
The cooling fan continues to run after the combiset is turned off.
Possible fault Solution
This is not a fault. The fan continues to run until the
appliance has cooled sufficiently. It will
turn off automatically.
Frequently asked questions
26