Filter
Top Products
Exterior
The front of the appliance can be
cleaned with a sponge and a solution of
warm water and non abrasive liquid
dish soap. Dry with a soft cloth.
Only use a slightly damp sponge
when cleaning the controls. Water
could penetrate into the electronics
and cause damage.
Wipe any spills from descaling
immediately!
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent soiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Jog shuttles
Clean the jog shuttles with a sponge
and a solution of warm water and liquid
dish soap.
^ These jog shuttles may become
discolored or damaged if not cleaned
regularly. Do not use a stainless steel
cleaner on the jog shuttles.
Maintenance
The perforator should be changed after
15000 cups of coffee / espresso. The
perforator can be purchased from Miele.
It is recommended to contact the
Miele Service department for
assistance in performing this
maintenance task.
SETTINGS F
K12345 L on
G
k
C
^ Turn the left jog shuttle to "Settings".
MAINTENANCE
F
Y
K n I I
J
Z
^ Turn the right jog shuttle to
"Maintenance".
MAINTENANCE
carry out A
^ Press the right jog shuttle and turn it
to "carry out".
^ Press the right jog shuttle.
Cleaning and care
40