Filter
Top Products
^
A bar will appear. Turning the right-hand dial
anti-clockwise will make the bar smaller and decrease the
lighting, contrast or brightness.
Turning the right-hand dial clockwise will make the bar
bigger and increase the lighting, contrast or brightness.
^
Press the right-hand dial to save your setting.
The previous display menu will now appear and the A
symbol for "Back" will be highlighted in the display.
^
Press the right-hand dial again to reach the exit menu of
this display.
PROGRAMMING
FYKn
I
IJZ
Automatic rinsing
To remove any coffee grounds from the system, the water
piping must be rinsed through before the first drink of the day
is prepared. If programme option "Automatic rinsing" is set to
"On", rinsing will start automatically when the machine is
switched on and cold. This will also pre-heat the system
because hot water is used for the rinse process. A message
will appear in the display to let you know what is happening.
The machine will also run an automatic rinse before it
switches off, if it has been used to prepare a drink.
To prevent water from running into the drip tray
always place an empty cup under the spouts
before making the first drink.
SETTINGS F
K 12345L
onG k
C
^
Turn the left-hand dial until you reach the "Settings" menu.
PROGRAMMING
FYKn
I
IJZ
^
Turn the right-hand dial until the "Programming" symbol is
highlighted and then press the dial to confirm your
selection.
Settings: Customising your machine
23