Filter
Top Products
The message "Fault - 73" appears in
the display.
The brew unit cannot reset to the
correct position.
^
Take out and clean the brew unit.
See "Cleaning and Care - Brew unit".
^ Push the coffee ejector of the brew
unit into the correct position.
^ Set the brew unit aside and insert the
waste unit and the water tank.
^ Close the door.
The brew unit motor will automatically
move to the correct position.
^
When the message "Fit the brew unit"
appears, open the door and insert all
parts into the machine.
^
Close the door.
If the message still shows contact Miele
Technical Service.
Frequently asked questions
62