Water hardness
The hardness of the water used in the
coffee system must be determined and
programmed into the appliance. The
water hardness will determine how
frequently the unit must be descaled to
maintain the coffee system properly.
The machine monitors the volume of
water passing through it in conjunction
with the hardness of the water and will
indicate when descaling is necessary.
Your local water authority can tell you
the hardness of your tap water or you
can measure it yourself using the
enclosed test strip.
^
Dip the test strip in the water for
1 second and shake off any
remaining water. The result is visible
in about 1 minute.
If the water hardness is greater than
40 gr/gal, the water must be
descaled more often than displayed.
Calcium will build up faster than at a
lower water hardness and may
damage the machine.
To set the correct water hardness:
+ back
SETTINGS J... ~
+ CARE ...
+ USER PROFILES
^
Select "Settings" and then "more"
twice.
^
Select "Water hardness".
^
Select the center touch control to set
the water hardness harder (right) or
softer (left).
^
Select "OK" to save the selection.
Settings
28